Xylem Cond 1970i - Manual (Page 35)

Cond 1970i Operation
35 ba75692e01 01/2007
Note
The AutoStore function is interrupted if you start other functions, e.g.
output the data storage.
After the function is finished, the AutoStore function is continued. By
this, however, temporal gaps in the recording of the measured values
will occur.
Switching off AutoStore Switch AutoStore off by:
z setting the save interval (Int 1) to OFF, or
z switching the measuring instrument off and then on again.
6 Confirm with <RUN/ENTER>.
The prompt for the ID number appears on the display.
7 Set the required ID number with <
▲> <▼>.
8 Confirm with <RUN/ENTER>.
The instrument switches to the measuring mode and starts the
measuring and saving process.
AutoStore flashes on the display.
REL1
9 4 9
E R F
I
pH
No.
Time
Cal
O
AR
cm 1/
Tref25
TP
ARng nLF
°
C
cm S/
Sal
RCL
%
S
%
m
mg/ l
Oxi
Year
Day.Month
Tref20
LoBat Lin
Sal
TEC
Baud
K /
REL2
pH / mV
1
Store Auto
Ident