Xylem Cond 1970i - Manual (Page 56)

Technical data Cond 1970i
56 ba75692e01 01/2007
Serial interface Automatic switchover when a PC or a printer is connected via the cable,
AK 340/B or AK 325/S.
Guidelines
and norms used
Type RS232, data output
Baud rate Can be set to
1200, 2400, 4800, 9600 Baud
Data bits 8
Stop bits 2
Parity None
Handshake RTS/CTS + Xon/Xoff
Cable length Max. 15m
Analog output (AK 323/
S cable)
Automatic switchover when the recorder is connected by the cable,
AK 323/S.
pH output signal -200 ... +1999 mV for the range
- 2.00 ... + 19.99
mV output signal -1999 ... +1999 mV for the range
-1999 ... +1999 mV for the range
Accuracy ± 0.5 % of display value
Internal resistance < 5 Ohm (current limited to max. 0.2 mA
output current)
Output signal 0 ... 1.999 V for range
0 ... 1999 digits
Accuracy ± 0.5 % of display value
Internal resistance < 5 Ohm (current limited to max. 0.2 mA out-
put current)
EMC E.C. guideline 89/336/EEC
EN 61326-1:1997
EN 61000-3-2 A14:2000
EN 61000-3-3:1995
FCC Class A
Instrument safety E.C. guideline 73/23/EEC
EN 61010-1 A2:1995