Alpha Technologies DSM3 for XM3 - Technical Manual - Manual (Page 102)

102 745-814-B11-001, Rev. C (03/2014)
13.0 Dual IP Mode (Addendum)
13.3.3 Specifying atidoc03.cfg name and location via DHCP Tags
In the User-defined area of the DHCP Tags, above option 192, the Communications Module will
look for the following value:
Tag: [Insert Unique Tag Name, e.g. ‘ati-tag’]
Value: aticonfig
In the Tag value immediately following will be the value for the TFTP server to use:
Tag: [Insert Unique Tag Name, e.g. ‘ati-ip’]
Value: IP address of TFTP server (i.e. 192.168.1.51)
Immediately following will be the value for the config filename:
Tag: [Insert Unique Tag Name, e.g. ‘ati-name’]
Value: =atidoc03.cfg (an equal sign needs to be in front of the filename for the DHCP server to
recognize this as a valid entry)
13.0 Dual IP Mode (Addendum)