0 alpha mib parameters, 1 definitions and settings – Alpha Technologies DSM3 for XM3 - Technical Manual User Manual
Page 86
86
745-814-B11-001, Rev. C (03/2014)
10.1 Definitions and Settings
The following tables display commonly-configured Alpha MIB parameters and provide specific information
with regard to functionality, options, OIDs, types and variables.
Parameter
OID
Description
Access
Type
Value
atiMgntSnmp
1.3.6.1.4.1.926.1.3.1.0
Object
Identifiers
SNMP TRAP ADDRESSES
atiMgmtSnmpTrapTable
1.3.6.1.4.1.926.1.3.1.1
Object
Identifiers
atiMgmtSnmpTrapAddress.1
1.3.6.1.4.1.926.1.3.1.1.1.2.1
SNMP Trap Address (1)
Read/Write
IP Address
0.0.0.0 (default)
atiMgmtSnmpTrapAddress.2
1.3.6.1.4.1.926.1.3.1.1.1.2.2
SNMP Trap Address (2)
Read/Write
IP Address
0.0.0.0
atiMgmtSnmpTrapAddress.3
1.3.6.1.4.1.926.1.3.1.1.1.2.3
SNMP Trap Address (3)
Read/Write
IP Address
0.0.0.0
atiMgmtSnmpTrapAddress.4
1.3.6.1.4.1.926.1.3.1.1.1.2.4
SNMP Trap Address (4)
Read/Write
IP Address
0.0.0.0
atiMgmtSnmpTrapServerAddressType.1
1.3.6.1.4.1.926.1.3.1.1.1.3.1
Address mode of
atiMgmtSnmpTrapServerAddress (1)
Read/Write
Integer
1: IPv4(1)
2: IPv6(2)
atiMgmtSnmpTrapServerAddressType.2
1.3.6.1.4.1.926.1.3.1.1.1.3.2
Address mode of
atiMgmtSnmpTrapServerAddress (2)
Read/Write
Integer
1: IPv4(1)
2: IPv6(2)
atiMgmtSnmpTrapServerAddressType.3
1.3.6.1.4.1.926.1.3.1.1.1.3.3
Address mode of
atiMgmtSnmpTrapServerAddress (3)
Read/Write
Integer
1: IPv4(1)
2: IPv6(2)
atiMgmtSnmpTrapServerAddressType.4
1.3.6.1.4.1.926.1.3.1.1.1.3.4
Address mode of
atiMgmtSnmpTrapServerAddress (4)
Read/Write
Integer
1: IPv4(1)
2: IPv6(2)
atiMgmtSnmpTrapServerAddress.1
1.3.6.1.4.1.926.1.3.1.1.1.4.1
Address of trap server (1)
Read/Write
IP Address
0.0.0.0 (default)
atiMgmtSnmpTrapServerAddress.2
1.3.6.1.4.1.926.1.3.1.1.1.4.2
Address of trap server (2)
Read/Write
IP Address
0.0.0.0 (default)
atiMgmtSnmpTrapServerAddress.3
1.3.6.1.4.1.926.1.3.1.1.1.4.3
Address of trap server (3)
Read/Write
IP Address
0.0.0.0 (default)
atiMgmtSnmpTrapServerAddress.4
1.3.6.1.4.1.926.1.3.1.1.1.4.4
Address of trap server (4)
Read/Write
IP Address
0.0.0.0 (default)
SECURE SNMP ACCESS ADDRESS
atiMgmtSnmpAccessTable
1.3.6.1.4.1.926.1.3.1.2
Object
Identifiers
atiMgmtSnmpAccessAddress.1
1.3.6.1.4.1.926.1.3.1.2.1.2.1
Secure IP Address (1)
Read/Write
IP Address
0.0.0.0 (default)
atiMgmtSnmpAccessAddress.2
1.3.6.1.4.1.926.1.3.1.2.1.2.2
Secure IP Address (2)
Read/Write
IP Address
0.0.0.0
atiMgmtSnmpAccessAddress.3
1.3.6.1.4.1.926.1.3.1.2.1.2.3
Secure IP Address (3)
Read/Write
IP Address
0.0.0.0
atiMgmtSnmpAccessAddress.4
1.3.6.1.4.1.926.1.3.1.2.1.2.4
Secure IP Address (4)
Read/Write
IP Address
0.0.0.0
SNMP ACCESS ENABLE
atiMgntSnmpAccess
1.3.6.1.4.1.926.1.3.1.3.0
Object
Identifiers
atiMgmtSnmpSnmpv1Access
1.3.6.1.4.1.926.1.3.1.3.1.0
SNMPv1 Access to Power Supply
Data
Read/Write
Integer
1 = Disable
2 = Enable (Default)
atiMgmtSnmpSnmpv2Access
1.3.6.1.4.1.926.1.3.1.3.2.0
SNMPv2c Access to Power Supply
Data
Read/Write
Integer
1 = Disable
2 = Enable (Default)
CPE & SECURITY KEY (Dual IP)
atiMgmtSnmpAlphaSetAccess
1.3.6.1.4.1.926.1.3.1.3.3.0
"Set to Data Access Key
CIBSET (default)"
Read/Write
Octet String
Set to match the value
of the Data Access Key
atiMgmtSnmpAlphaSetKey)
atiMgmtSnmpAlphaSetKey
1.3.6.1.4.1.926.1.3.1.3.4.0
Data Access Key (Dual IP)
Read/Write
Octet String
CIBSET (default)
atiMgmtSnmpCPESetEnabled
1.3.6.1.4.1.926.1.3.1.3.5.0
Corresponds to whether
or not the action taken on
atiMgmtSnmpAlphaSetKey was
successful. Once enabled, writing
1(false) to this variable will disable
CPE sets.
Read/Write
Integer
1=Disabled (False)
2=Enabled (True)
atiMgmtSnmpSnmpCPEAccess
1.3.6.1.4.1.926.1.3.1.3.6.0
Enables the CPE interface - Dual
IP mode
Read/Write
Integer
1=Disabled (Single IP)
2=Enabled (Dual IP)
10.0 Alpha MIB Parameters
The Alpha MIB Definitions and Settings are subject to change without notice and should only be used for
advanced diagnostics. The SCTE-HMS MIBs listed in
Section 6.0, Data Management should be implemented
for status monitoring & control.
NOTE: