Frame rates format_7 – ALLIED Vision Technologies Marlin F-201 User Manual

Page 156

Advertising
background image

Video formats, modes and bandwidth

MARLIN Technical Manual V2.4.0

156

The frame rates in video modes 0 to 2 are specified and set fixed by IIDC
V1.3.

Frame rates Format_7

In video Format_7 frame rates are no longer fixed but can be varied dynam-
ically by the parameters described below.

The following formula is used to calculate for the CCD models the highest
frame rate in Format_7:

It assumes that the maximum frame rate is the inverse of the sum of all
events in a CCD, which take time such as:

Details are described in the next chapters:

Max. frame rate of CCD (theoretical formula)

Diagram of frame rates as function of AOI by constant width

Table with max. frame rates as function of AOI by constant width

Note

L

Different values apply for the different sensors.

Frame rates may be further limited by longer shutter
times and/or bandwidth limitation from the IEEE 1394
bus.

Formula 3: Frame rate calculation

Note

L

The time to transfer the storage to the vertical shift
register (Charge transfer time)

The time to shift out the dummy lines

The time to dump the lines outside the AOI

The time to shift out the lines of the AOI. (Scanning
time)

Note

L

Different parameters apply for different models.

framerate

In

framerate

CCD

1

T

Ch

eTrans

arg

T

Dummy

T

Dump

T

Scan

+

+

+

-----------------------------------------------------------------------------------------------

=

=

Advertising
This manual is related to the following products: