AT&T SB67138 - Manual (Page 21)

Menu settings
Use this feature to use the menus to change the telephone base settings.
Press MENU
/ENTER
when in idle mode (when the telephone telephone
is not in use) to enter the main menu.
Press or to scroll to the feature to be changed.
to scroll to the feature to be changed.
The > symbol indicates the selected menu item.
Press
MENU/
ENTER to select the menu item.
Press EXIT to exit setup without making changes.
NOTE: Press EXIT to cancel an operation, exit the menu display, or return to idle mode.
Ringer volume
Use this feature to set the ringer volume to one of three levels or turn the ringer
off. When the ringer is off, the icon appears on the telephone base screen.
1. When the telephone is idle, press MENU
/ENTER
.
2. Press or to scroll to Ringer setting. Press
MENU/
ENTER.
3. Press
MENU/
ENTER again to select Ringer volume.
4. Press , , VOL+ or VOL- on the telephone base to
adjust the ringer volume.
5. Press
MENU/
ENTER to save the setting and return to
the previous menu. There is a confirmation tone. To exit
without making changes, press
EXIT.
NOTE: The ringer volume also determines the ringer volume for
intercom calls (page 50). If the telephone base ringer volume is
set to off, that telephone base is silenced for all incoming calls,
including intercom calls.
1.
2.
3.
4.
Getting started
Telephone base setup
15
Directory
Call log
Ringer setting
Mailbox setup
>
Ringer volume
Ringer tone
Ringer group >
Ringer volume
ENTER=Save
*: Base
0 missed calls
5:12PM 4/27
Ringer volume
ENTER=Save