Telephone base setup – AT&T SB67138 User Manual

Page 32

Advertising
background image

2. Unplug any audio device that is connected to the

HEADSET/AUX IN jack

from the telephone base.

3. Press

MENU/

ENTER to start recording. After recording six seconds of silence,

your recorded audio is deleted and the display automatically returns to the
previous menu. To exit without making changes, press

EXIT.

Select music on hold source

When the telephone is idle, press

MENU

/ENTER

.

Press or to scroll to

Base setup. Press

MENU/

ENTER.

Press or to scroll to

Music on hold. Press

MENU/

ENTER.

Press or to scroll to

M.O.H. source. Press

MENU/

ENTER.

Press or to highlight

Recorded M.O.H. or Aux In Device.

If you select

Aux In Device and the HEADSET/AUX IN

jack is connected with an audio device, when you press

MENU/

ENTER to save the setting, Device connected to

the headset jack will be used for M.O.H. displays.
-OR-
If you select

Aux In Device and the HEADSET/AUX IN jack is not

connected with an audio device, when you press

MENU/

ENTER to save the

setting,

No Device is connected to the headset jack at base displays.

Connect an audio device to the

HEADSET/AUX IN jack (page 23), then

choose

Review M.O.H.

The screen returns to the previous menu. To exit without making changes,
press

EXIT.

NOTES:

If you unplug the audio device while a call is on hold, the music on hold source is immediately
set to

Recorded M.O.H. The screen displays Recorded M.O.H. reconnect. Aux In Device

reset source.
If you unplug the audio device while a call is on hold, you can plug a corded headset into the
HEADSET

/AUX IN

jack and activate it by pressing HEADSET on the telephone base.

If you select

Aux In Device as the music on hold source but you want to use a corded

headset, you must turn off the music on hold (see page 22) or change the source to

Recorded

M.O.H. If you try to use a corded headset without changing the setting, To use headset, turn
off M.O.H. or reset source.
displays with an error tone.
If you unplug your audio device from the telephone base, your music on hold source will
automatically be set to

Recorded M.O.H.

1.

2.

3.

4.

5.

1.

2.

3.

4.

M.O.H. source
:Recorded M.O.H.

ENTER=Save

M.O.H. on/off
Review M.O.H.
Record new M.O.H.
M.O.H. source

>

M.O.H. source
:Aux In Device

ENTER=Save

Getting started

Telephone base setup

26

Advertising