AT&T SB67138 - Manual (Page 51)

-OR-
The recording ends when you disconnect the call.
While recording a phone conversation:
The other party hears a short beep when the recording begins and once each
minute during the recording. To ensure compliance with state and federal
regulations regarding the recording of a telephone call, you should start the
recording process and inform the caller that you are recording the call.
To play back a memo or phone conversation:
Play memos or two-way phone conversations the same way as messages are
played. (see
Message playback on page 74).
NOTES
:
Call privacy is automatically on when recording a call.
Calls that you record use the same memory as the answering system. Recording long conversations
uses up space othervise available for recording normal messages. Please see
Remaining space on
page 34.
Mute
Use this feature during a telephone conversation to silence the microphone.
You can hear the caller, but the caller cannot hear you.
To mute a call:
Press MUTE. When mute is on, the MUTE light flashes;
the screen also flashes -MUTE.
To take a call off mute:
Press MUTE again and resume speaking.
NOTE: Transferring the call, changing lines or putting a call on hold also cancels the
mute function.
1.
2.
•
•
Telephone base operation
Options while on calls
45
Line1 00:05:40
8888832445
-MUTE