AT&T SB67138 - Manual (Page 78)

If the caller enters an extension number plus the # (pound key) after
hearing the announcement, the auto attendant transfers the call to the
specified extension. If the call is not picked up after five rings, the caller
hears “No one is available to answer the call. To leave a message, press 1.
To call another extension, press 2. To call the operator, press star,” and waits
five seconds for another entry from the caller. If the caller still hasn’t entered
an extension number after hearing this message three times, the auto
attendant forwards the call to the general mailbox to leave a message.
If the caller enters an invalid extension number, the auto attendant
announces, “Please wait. This number is not assigned. To leave a message,
press 1. To call another extension, press 2. To call the operator, press
star .”
If the caller enters the (star key) plus the # (pound key), the auto
attendant announces ”Calling the operator,” and then transfers the call to
the telephone base.
If the caller enters the remote access code while hearing the
announcement, the auto attendant stops playing the announcement and the
caller can remotely access the general mailbox (See
Remote access on
page 79 for information).
If the caller does not enter any number after hearing the announcement,
the auto attendant announces three times “Hello, this is auto attendant.
Please enter your party’s extension, followed by pound (#). If you are using a
rotary telephone, please stay on the line. For a company directory, dial star
twice.” Then the auto attendant transfers the call to the general mailbox for
the caller to leave a message.
Using multiple auto attendants
Use this feature to set one or more telephone lines to act as auto attendants
when the primary auto attendant is turned off or busy.
An auto attendant is busy when someone at that
extension is doing any of the following:
dialing from the directory or call history
using any of the lines to make or answer a call
when the answering system is recording a message
at that extension
You can choose a particular telephone line to always be the primary auto
attendant by setting that line to have the shortest auto attendant pickup delay
(number of rings) and setting the other auto attendants to have longer pickup
delays (more rings). If the auto attendant pickup delays are the same, incoming
calls are distributed randomly to the auto attendants.
•
•
•
Answering system
Auto attendant operation
*:Base
0 Missed call
08:00AM 12/30
AuAt AuAt
72