Burkert Type 2037 - Manual (Page 36)

36
PackagingandTransport
14 pacKaging anD TranspOrT
noTe!
transport damages!
Inadequately protected equipment may be damaged during
transport.
• During transportation protect the device against wet and dirt in
shock-resistant packaging.
• Avoid exceeding or dropping below the allowable storage
temperature.
• Protect the electrical interfaces of the coil and the pneumatic
connections from damage by placing protective caps on them.
15 sTOrage
noTe!
incorrect storage may damage the device.
• For prolonged storage, slacken the body screws to prevent the
diaphragm from becoming distorted.
• Identify slackened screws for reasons of safety!
• Store the device in a dry and dust-free location!
• Storage temperature. -40 – +55 °C.
Danger!
risk of injury during re-installation. risk of injury from discharge
of medium through slackened body screws (acid, alkali, hot
media)!
Before re-installing the valves, ensure that the body screws have
been tightened correctly.
▶ Before re-installation, check the tightening torque of the body screws.
16 DispOsal
→
Dispose of the device and packaging in an environmentally friendly
manner.
noTe!
damage to the environment caused by device components
contaminated with media.
• Observe applicable regulations on disposal and the environment.
• Observe the national waste disposal regulations.
english
Type 2030, 2031, 2031 K, 2032,
2033, 2037