Burkert Type 2037 - Manual (Page 7)

7
GeneralInformation
4 general infOrmaTiOn
4.1 contact addresses
germany
Bürkert Fluid Control Systems
Sales Center
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: [email protected]
international
Contact addresses can be found on the final pages of the printed
operating instructions.
And also on the Internet at:
www.burkert.com
4.2 Warranty
The warranty is only valid if the device is used as intended in accordance
with the specified application conditions.
4.3 information on the internet
The operating instructions and data sheets for Types 2030, 2031,
2031 K, 2032, 2033 and 2037 can be found on the Internet at:
www.burkert.com
5 sysTem DescripTiOn
5.1 general Description
The Types 2030, 2031, 2031 K, 2032, 2033 and 2037 are an exter-
nally controlled diaphragm valve with piston drive and diaphragm seal.
The valve is self-draining in the appropriate installation position.
5.2 intended application area
The diaphragm valve of Type 2030 is designed for the control of con-
taminated and aggressive media. The valves of Type 2031, 2031 K,
2032, 2033 and 2037 can be used even for ultra-pure or sterile media
with a higher viscosity.
The valves may only control media which do not attack the body and
seal materials (see type label). Information on the resistance of materials
to the media is available from your Bürkert sales office.
english
Type 2030, 2031, 2031 K, 2032,
2033, 2037