Fluid Components International ST100 Series - Manual (Page 51)

ST100 Series Flow Meter APPENDIX C - APPROVALS
Fluid Components International LLC 47
APPENDIX C APPROVALS
Flow/Liquid Level/Temperature Instrumentation
Visit FCI on the Worldwide Web: www.fluidcomponents.com
1755 La Costa Meadows Drive, San Marcos, California 92078 USA 760-744-6950  800-854-1993  760-736-6250
European Office: Persephonestraat 3-01 5047 TTTilburg – The Netherlands – Phone 31-13-5159989  Fax 31-13-5799036
Doc no. 23EN000024A
EC DECLARATION OF CONFORMITY ST100 SERIES
We, Fluid Components International LLC, located at 1755 La Costa Meadows Drive, San Marcos,
California 92078-5115 USA, declare under our sole responsibility that the ST100 Flowmeter Product
Family, to which this declaration relates, is in conformity with the following directives and specifications.
Directive 94/9/EC ATEX
IECEx Scheme
Certified by FM Approvals LLC: 1151 Boston-Providence Turnpike, Norwood, MA 02062, USA
EC-Type Examination Certificates:
FM12ATEX0016X satisfies EN 60079-0: 2009, EN 60079-1: 2007, EN 60079-31: 2009,
EN 60529 1991+A1:2000 requirements for use in hazardous areas.
IECEx FMG 12 0003X satisfies IEC 60079-0: 2007-10, IEC 60079-1: 2007-04, IEC 60079-31: 2008
requirements for use in hazardous areas.
Hazardous Areas Approval FM12ATEX0016X / IECEx FMG 12 0003X for:
Category II 2 G Ex d IIC T6/T1 Gb Ta = -40ºC to +65ºC
Category II 2 D Ex tb IIIC T85ºC/ T450ºC Db Ta = -40ºC to +65ºC; IP67
Directive 2004/108/EC Electromagnetic Compatibility EMC
Immunity specification: EN 61000-6-2: 2005
Emissions specification: EN 61000-6-4: 2007
Directive 2006/95/EC Low Voltage
Electrical Safety Specification: EN 61010-1: 2001, 2 nd Edition
Directive 97/23/EC Pressure Equipment
The ST100L Model is in conformity with the sound engineering practices as defined in article 3,
paragraph of PED 97/23/EC.
Issued at San Marcos, California USA
26, September 2012
______________________________________
Eric Wible, Engineering Manager
Eric Wible
2012.09.26 14:41:20 -07'00'