Troubleshooting, 4 diagnostic tests (continued) – Hach-Lange SI792(x) E HACH GLI 3700 series SI792(x) T 7MA2200 and 8398 series User Manual User Manual
Page 85
Advertising
Troubleshooting
83
Specify output
current
From the measuring mode, press
CONF
and enter passcode
‘5555’. The measured current will show in the secondary
display. The output current in the main display can be
modified.
To change the output current:
1. Select the current value with the
RIGHT ARROW
key.
2. Edit the number using the
UP ARROW
key.
3. Press
ENTER
to confirm. The entered value will show in
the secondary display. The transmitter will remain in Hold
mode.
4. To exit Hold mode, press
CONF
, then
ENTER
to return to
measuring mode.
10.4 Diagnostic tests (continued)
Function
Description
Advertising