Hach-Lange RTC103 N-Module - Manual (Page 9)

9
Section 2 General Information
2.1 Safety information
Please read this entire manual before unpacking, setting up, or operating this equipment.
Pay attention to all danger and caution statements. Failure to do so could result in serious
injury to the operator or damage to the equipment.
To prevent damage to or impairment of the device's protection equipment, the device may
only be used or installed as described in this manual.
2.1.1 Use of hazard information
Note: Information that supplements points in the main text.
2.1.2 Precautionary labels
Read all labels and tags attached to the instrument. Personal injury or damage to the
instrument could occur if not observed.
D A N G E R
Indicates a potentially or imminently hazardous situation that, if not avoided, can result in death or
serious injury.
WA R N I N G
Indicates a potentially or imminently dangerous situation that, if it is not avoided, can lead to
death or to serious injuries.
C A U T I O N
Indicates a possible dangerous situation that can have minor or moderate injuries as the result.
N O T I C E
Indicates a situation that, if it is not avoided, can lead to damage to the device. Information that
requires special emphasis.
This symbol is a warning triangle. Follow all safety notes that follow this symbol to prevent possible injuries. If
this symbol is located on the device, it refers to information in the operating- and/or safety notes of the user
manual.
This symbol can be attached to a housing or a barrier in the product and shows that electric shock risk and/or
the risk of a death through electric shock exists.
Electrical equipment marked with this symbol may not be disposed of in European domestic or public disposal
systems after 12 August 2005. In conformity with European local and national regulations, European electrical
equipment users must now return old or end-of life equipment to the manufacturer for disposal at no charge to
the user.
Note: You obtain instructions on the correct disposal of all (marked and not marked) electrical products that
were supplied or manufactured by Hach-Lange at your relevant Hach-Lange sales office.
C A U T I O N
The manufacturer is not responsible for any damages due to misapplication or misuse of this
product including, without limitation, direct, incidental and consequential damages, and disclaims
such damages to the full extent permitted under applicable law. The user is solely responsible to
identify critical application risks and install appropriate mechanisms to protect processes during a
possible equipment malfunction.