Configuring hdsl alarms, Accessing hdsl alarms configuration, Hdsl a – ADC Campus-REX2 RS User Manual
Page 38: Onfiguring, Larms
Chapter 2 - Configuring HDSL Parameters
26
Campus-REX2 RS Interface Card User Manual
C
ONFIGURING
HDSL A
LARMS
You can configure options for four types of alarms:
•
HDSL ES Alarm Threshold determines the number of errored seconds
that must occur to trigger an alarm.
•
HDSL Margin Alarm Threshold determines the margin, in dB, that
triggers an alarm.
•
Alarm on Local I/F LOS lets you enable or disable the local Loss of
Signal alarm.
•
Alarm on Remote I/F LOS lets you enable or disable the remote Loss of
Signal alarm.
Access the configuration screen, then set the options.
Accessing HDSL Alarms Configuration
1
From the Main Menu (
), type
then press
to access the
System Settings Menu.
3
ENTER
Jul 07, 2003
ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
Local Unit ID:
Local I/F:
REX2
Remote Unit ID:
Remote I/F: REX2
Circuit ID:
SYSTEM SETTINGS MENU
1)
SYSTEM PARAMETERS
2)
HDSL PARAMETERS
(R)eturn
ENTER CHOICE>