Accessing the routing tables – ADC Campus-REX2 RS User Manual
Page 68
Chapter 3 - Configuring the REX2
56
Campus-REX2 RS Interface Card User Manual
Accessing the Routing Tables
The Campus-REX2 has two separate routing tables. One table shows routes
that were statically configured (
“Managing the Static Routing Table” on
) and offers the capability of configuring additional static routes.
The other table shows IP addresses that were dynamically learned by RIP
(
“Viewing the Dynamic Routing Table” on page 59
).
Do the following to access the Router Configuration screen:
1
From the Main Menu (
), type
then press
to access
the REX2 Configuration and Status screen. Ensure Router is selected.
2
From the REX2 Configuration and Status screen, type
then press
. The Router Configuration screen is displayed.
2
ENTER
4
ENTER
Jul 07, 2003
ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
Local Unit ID:
Local I/F:
REX2
Remote Unit ID:
Remote I/F: REX2
Circuit ID:
ROUTER CONFIGURATION
1) IP ADDRESS CONFIGURATION
2) RIP CONFIGURATION
3) STATIC ROUTE CONFIGURATION
4) DYNAMIC ROUTE TABLE
5) STATIC ROUTE TABLE
6) ARP TABLE
7) DHCP SERVICES
(R)eturn
(M)ain Menu
ENTER CHOICE>