ADC Campus-REX2 RS - Manual (Page 84)

Chapter 4 - Managing System Parameters
72 Campus-REX2 RS Interface Card User Manual
V IEWING P RODUCT I NFORMATION
The Product Information screen displays manufacturing information about
the Campus-REX2 RS Interface Card. To open the Product Information
screen:
1 From the Main Menu, type then press . The System Status
screen is displayed.
2 Type then press . The Product Information screen is displayed.
The Product Information screen displays the following information:
• the version number of the Campus-REX2 software (this also is displayed
in the heading of all the terminal screens)
• the PROM checksum, a hexidecimal number used to verify unit PROMs
• the hardware version of the Campus-REX2 RS Interface Card
1 ENTER
5 ENTER
Jul 07, 2003 ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
Local Unit ID: Southall Quad 4 Local I/F: REX2
Remote Unit ID: Central Remote I/F: REX2
Circuit ID: Southeast line 421
PRODUCT INFORMATION
Firmware Version: 4.6G
PROM Checksum: 5FA1
Hardware Configuration: FF10
Desktop
AC
(R)eturn (M)ain Menu
ENTER CHOICE>