Impulse 520W User Manual
Page 45
Configuring a Wireless Module (Continued)
Start by opening the Windows Wireless Network Connection utility, which can be
found by clicking the Start button and hovering over My Network Places. Right-
click on My Network Places and then select Properties from the menu. You should
see a Wireless Network Connection listed in the new window that opens up.
Right-click on your wireless network connection and select ‘View Available
Wireless Networks’ from the menu.
The Wireless Network Connection window opens, as shown below, and you should
see the SeaI/O module listed with the SSID “SL_Recovery.” If not, reset the module
using the instructions on the previous page. Other nearby wireless networks will also
be listed here. Select the SSID “SL_Recovery” and click the Connect button.
© Sealevel Systems, Inc.
- 42 -
SeaI/O User Manual