Impulse 520W - Manual (Page 48)

Configuring a Wireless Module (Continued)
You must now change the IP Address of your wireless adapter to match the subnet
(first 3 octets) of the wireless SeaI/O module listed in Ethernet Config.
You can change your wireless adapter's IP Address by going to the Properties dialog
for your wireless adapter (Start Æ Settings Æ Network Connections). Right-click on
your network adapter and then select Properties from the menu. This opens the
Wireless Network Connection Properties window.
On the General tab, select ‘Internet Protocol (TCP/IP)’, leaving the box checked, and
then click the Properties button.
© Sealevel Systems, Inc. - 45 - SeaI/O User Manual