Impulse 520W User Manual
Page 46
Advertising
Configuring a Wireless Module (Continued)
The Wireless Network Connection window will now display “Limited or no
connectivity” next to the “SL_Recovery” network connection. All wireless SeaI/O
modules are shipped with DHCP enabled. When you first connect a wireless SeaI/O
module to the network, the status LEDs on the front of the module will blink while it
searches for a DHCP server.
Since “SL_Recovery” is an Ad hoc point-to-point network and not on the same
network as any available DHCP servers, the SeaI/O module will not be able to
complete the connection.
Close the Wireless Network Connection utility (you will still be directly connected
to “SL_Recovery”).
© Sealevel Systems, Inc.
- 43 -
SeaI/O User Manual
Advertising