Impulse 520W User Manual
Page 56
Advertising
Configuring a Wireless Module (Continued)
Start MaxSSD (Start Æ All Programs Æ Sealevel SeaMAX Æ MaxSSD) and select
Ethernet in the drop down box. Verify that the IP Address for the wireless SeaI/O
module appears in the right hand pane.
Choose the correct IP Address (if more than one is listed) and click the “SeaI/O
Configuration” tab. Use the drop down box to select the appropriate Slave ID (default
is 247) and the click the “Get SeaI/O Module Settings” button. You will see the
description for the wireless SeaI/O module appear in the right hand frame.
© Sealevel Systems, Inc.
- 53 -
SeaI/O User Manual
Advertising