Impulse 520W - Manual (Page 49)

Configuring a Wireless Module (Continued)
NOTE: Before you change any settings in the following window, make a
note of your original settings. You will need to revert back to your
original wireless adapter settings once you have successfully
configured the wireless SeaI/O module to work with your network.
In the Internet Protocol (TCP/IP) Properties window, click the radio button for
‘Use the following IP Address’. The first 3 octets of the IP address must match the
IP address displayed for the wireless SeaI/O module. The last octet must be different
In this example, the last octet for the wireless SeaI/O module is 32 and we configured
the last octet for the wireless adapter to 55. Click the OK button in this window.
Click the OK button on the Wireless Network Connection Properties window.
© Sealevel Systems, Inc. - 46 - SeaI/O User Manual