Luminex xPONENT 3.1 - Manual (Page 111)

99
Using the Software
Create Calibration Reports
1. Open the Results page, then open the Reports tab.
2. In the Report list, click Calibration Summary.
3. In the Type list, click the calibrator or verifier for which you want to create a report.
4. In the Dates list, select a start date for the date range you want to view.
5. In the Through list, select the end date for the date range you want to view.
6. Click Generate to display the desired report.
7. Use the left or right Page arrows to navigate to the different report pages.
8. Click Print to print the report, or Save to save the report.
9. Click New Report to generate another report.
Managing Sample Lists
Use the Samples page to create a sample list, view or edit sample list details, or create a
batch.
Create New Sample List
1. Open the Samples page.
2. In the Sample Lists section, select the protocol you are using for the sample list, then
click Create New Samples. The Create Sample tab opens.
3. In the ID box, type the sample ID.
4. Type a patient first name in the First name box if desired.
5. Type a patient last name in the Last name box if desired.
6. To add a comment about the sample, type it in the Comment box; this is optional.
7. Click Save to add the sample to the Sample list.
8. To add more samples, click New. Repeat Steps 3-7 until you have added all of the
samples you want in your samples list.
9. Once you have added the all desired samples, click Close.
NOTE: Samples can also be added via a LIS.
Edit Sample Lists
1. Open the Samples page.
2. In the Samples Lists section, choose the protocol you want to edit, then click Details.
The Edit Samples tab opens.
NOTE: If the number in the Number of Samples column is “0”, there are
no samples attached to the protocol.
3. Click on a sample, then use the Move arrows to move it up or down in the sample list,
changing the order in which they will be acquired.
4. To add a new sample to the list, click New, then follow steps 3-7 in “Create New
Sample List” above.
5. To edit an existing sample, click the sample, then click Edit.
6. Once you have completed editing the sample list, click Close.