Luminex xPONENT 3.1 - Manual (Page 60)

Luminex xPONENT 3.1 Software Manual
48
Protocols Tab
Use this tab to create, import, export, edit, or delete a protocol. You can also add new
assay standard and or control information using one of the installed protocols.
FIGURE 29. Protocols Tab
This tab contains the following:
Create New Protocol. Opens the Settings tab to create a new protocol. For more
information, see “Settings Tab” on page 49.
Installed Protocols. Displays installed protocols. The list includes Name, Version,
Manufacturer, and Date information for each protocol.
New Std/Ctrl. Opens the Std/Ctrl Details tab. For more information, see “Std/Ctrl Details
Tab” on page 59.
Delete. Opens the Delete Protocol dialog box to delete a protocol selected in the
Installed Protocol list. Click Yes to delete the selected protocol.
Import. Opens the Open dialog box to select a protocol (.lxt file) to import. Navigate to the
protocol file you wish to import and click Open.
Export. Opens the Save As dialog box to export a selected protocol. Choose an export
destination and name, and click Save.
Edit. Opens the Settings tab to edit a selected protocol. For more information, see
“Settings Tab” on page 49.
View. Opens the Settings tab to view the protocol. Click Next to advance to the Analytes
tab, and Next again to advance to the Plate Layout tab. Click Close at any of the three