Luminex xPONENT 3.1 - Manual (Page 86)

Luminex xPONENT 3.1 Software Manual
74
Set Default. Sets the chosen analysis program as the default analysis program for
xPONENT.
OK. Saves the chosen settings and exists the dialog box.
Cancel. Cancels changes and exits the dialog box.
Remove. Removes the selected program from the Installed Analysis Programs list.
Edit. Opens the New External Analysis Program dialog box where you can edit the
settings for the selected program.
Disable Automatic launching of External Third Party Analysis when batches com-
plete for all protocols. Disables the automatic launch of the third-party analysis program
automatically after batch acquisition.
Arrange Main Navigation buttons
These options enable the customization of the main page headers at the top of the
xPONENT
®
window.
Arrange Main Navigation Buttons. Select or clear the check boxes to display or remove
main page headers. The Home page header cannot be removed. The Admin page
cannot be removed if a security license is not being used, or if the user currently logged in
is setup as a member of the Administrator group profile. For further information about the
user setup, see “Group Setup Tab” on page 75.
Arrange Main Navigation Button Arrows. Click a main page header and then click an
up or down arrow to change the selected header’s order of appearance at the top of the
window. The Home page cannot be moved, it always appears as the first main page
header.
Default. Restores the software to the default page header arrangement.
Maintenance Options
This section displays procedures to use when initializing the system.
System Initialization Procedure. Displays the available selections to use as the default
system initialization procedure. After selecting an option, click Save at the bottom right
portion of the window to save the selection as the default procedure.
Data Conversion
This section contains options to use when converting data from an earlier version of
xPONENT.
Open. Opens a dialog box to select a data file from an earlier version of the xPONENT
software to convert to the current version. It also allows input of IS 2.3 data. For
information about the file types and procedures to convert older data, see “Data
Conversion” on page 91.
Cancel. Cancels changes made to the System Setup tab.
Save. Save changes made to the System Setup tab.