DoorKing Remote Account Manager - Manual (Page 33)

3.4 Holiday Schedules
You can create up to 32 holidays in the HOLIDAY SCHEDULE window. When a holiday date is not present, the
holiday hold open times are not in effect. When a holiday date is present, the holiday hold open times are in
effect.
You can apply the holiday schedule to Security Levels by checking the HOLIDAYS FOR SECURITY LEVELS
button in the Holiday Schedule window. Doing this establishes Time Zone 4 (TZ4) in security levels 2 through 31
as a Holiday (HOL) time zone. Note: Does not apply to Model 1834.
CAUTION: If you turn on Holidays for Security Levels by placing an “X” in the box, the HOL Time Zone
will supersede all other time zones established within the security level. If you have more than a single
time zone programmed within a security level, this will cause all the time zones to revert to the single
HOL time zone that you establish.
Figure 22
1. Click the HOLIDAY button on the tool bar from
the relays window to display the holiday
schedule window (Fig 22).
2. Enter the holiday name, month and day.
Clicking the down arrow will display a calendar
(Fig 23).
3. Click CANCEL to return to the System Info
screen without saving any changes.
4. Click CLEAR to clear all holidays.
5. Click OK to save the holidays that you created
and to return to the System Information screen.
Some holidays will need to be updated on a yearly
basis. For example, Memorial Day, Labor Day and
Thanksgiving Day usually fall on different days of the
month each year. These holidays will have to be
updated year to year.
Figure 23
1835-066-N-7-13 Page 33