DoorKing Remote Account Manager - Manual (Page 40)

3.7 Facility Codes and Device Association
The software allows for the option of using or not using device facility codes. When the facility code function is
enabled, the device facility code must match with a facility code entered in the program, otherwise access will be
denied. If you do not want to use facility codes, leave the facility code enable button unchecked.
3.7.1 Facility Codes
Figure33
1. Click the FACILITY CODE button on the tool bar. The
Facility Code window will appear (fig 33).
2. To enable facility codes, click the ENABLE FACILITY
CODE button. Note: you must check this box to enter
facility codes.
3. Enter up to 10 3-digit facility codes. Note: valid facility
codes are 000 – 255.
4. Click CANCEL to return to the system info screen
without saving these changes.
5. Click CLEAR to reset the fields.
6. Click OK to save the changes.
When using DKS MicroPLUS transmitters, leave the first 0 in the
4-digit facility code off so that you enter only a 3-digit number.
For example, if the facility code is 0124, enter 124 in the facility
code field.
Page 40 1835-066-N-7-13