Nova-Tech GKa Indicator User Manual

Page 25

Advertising
background image

23 © Adam Equipment Company 2011

Press the [

Lim] key. If you are already in

the check weighing mode the display will ask

if you wish to store the current limits by

showing “StOrE” or recall another set of limits

by showing “rECALL”. The [

Lim] key can be

used to toggle between “StOrE” and “rECALL”.

I

f you want to store the limits, when “StOrE”

is displayed press the [Tare] key. The display

shows “St ”. Enter a number corresponding

to the desired memory location (0 to 9). “St

X” will be displayed for 2 seconds indicating

the location X where the current limits,

weighing units and settings for the beeper

and bar graph are stored. The indicator will

continue to work with the current settings as

active.

If you wish to recall any of the pre-stored

limits, press [Tare] when “rECALL” is

displayed. The display shows “rEC ”. Enter the

number corresponding to the desired

memory location (0 to 9) to be recalled. “rEC

X” will be displayed for 2 seconds indicating

the values stored in the location “X” is being

recalled. The indicator will change to the

recalled limits, weighing units and settings

for the beeper and bar graph.

Advertising