Nova-Tech GKa Indicator - Manual (Page 56)

54 © Adam Equipment Company 2011
The display will show the current increment value as used with the current decimal
point position.
Press the [Func] key to change the value. Select from 1,2,5,10, 20 or 50
Not all increments may be available for the capacity you selected.
For EC Approved versions the indicator will determine the increment that maintains
the number of divisions to be 3000 or less.
Press [Tare] to accept the displayed value.
Press [Zero] to return to weighing.
16.2.4 F4 –INITIAL ZERO RANGE
To enter this parameter, press the [Tare] key when “F4 int” is shown.
The display will show the current initial zero range.
Press the [Func] key to change the value and press [Tare] to accept the value.
Press [Zero] to return to weighing.
16.2.5 F5 -RE-ZERO RANGE
To enter this parameter, press the [Tare] key when “F5 rEZ” is shown.
The display will show the current re-zero range.
Press the [Func] key to change the value.