Nova-Tech GKa Indicator User Manual

Page 41

Advertising
background image

39 © Adam Equipment Company 2011

14.

PARAMETER SETTINGS

Pressing the [Func] key allows the user to access the parameters for customising the

indicator. The parameters are split into 4 groups-

1. Check weighing parameters,

2. RS-232 parameters

3. Indicator parameters

4. Percent and Animal Weighing Functions

When [Func] is pressed, display will first show “FUnC 1” for Check weighing
parameters.

Enter [2] for RS-232 parameters or [3] for Indicator parameters or [4] for
percent weighing and animal weighing, or press the [Func] key to advance
through the groups “FUnC 1”, “FUnC 2” , “FUnC 3” and “FUnC 4”. Press [Tare] to
enter the desired group of parameters.

Press [Zero] to return to the group “FUnC 1”. If you press [Zero] again, the
indicator will exit the User Parameter section and return to normal weighing.

14.1.

CHECK WEIGHING PARAMETERS

Shortcut to enter this group is to press and hold the [Unit] key for 4 seconds.
The display will go directly to “FUnC 1”.

Press [Tare] to enter the group.

Press [Func] to scroll through the parameters and press [Tare] to enter a
parameter setting.

Advertising