Nova-Tech GKa Indicator - Manual (Page 9)

© Adam Equipment Company 2011 7
3. INSTALLATION
3.1. UNPACKING
This indicator must be connected to a load cell platform and calibrated as necessary
to match the platform and user requirements. See Section 15 for set-up
information.
The users application and the technical specifications of the platform or load cell will
determine the necessary configuration.
4. LOCATING
•
The scales should not be placed in a location that will
reduce the accuracy.
•
Avoid extremes of temperature. Do not place in direct
sunlight or near air conditioning vents.
•
Avoid unsuitable tables. The table or floor must be rigid
and not vibrate.
•
Avoid unstable power sources. Do not use near large
users of electricity such as welding equipment or large
motors.
•
Do not place near vibrating machinery.
•
Avoid high humidity that might cause condensation.
Avoid direct contact with water. Do not spray or
immerse the scales in water.
•
Avoid air movement such as from fans or opening doors.
Do not place near open windows or air-conditioning
vents.
•
Keep the scales clean. Do not stack material on the
scales when they are not in use.