Nova-Tech GKa Indicator - Manual (Page 27)

25 © Adam Equipment Company 2011
•
Press [Tare] again to enter percent weighing. The indicator will set the sample
mass on the platform as 100% reference weight.
NOTE: If there is no reference weight on the pan and percent weighing
function is entered, pressing [Tare] again will return the indicator to normal
weighing.
•
Remove the sample weight. Then any other weight placed on the platform
will be displayed as a percentage of the original sample. For example, if
3500g is placed on the platform and percent weighing is selected, the display
will show 100.00%. Remove the 3500g weight and place a 3000g weight. The
display will show 85.7% as 3000g is 85.7% of 3500g.
•
The number of decimal points will depend on the weight used. A smaller
weight will show only “100%” while a larger weight might show “100.00%”.
•
If the indicator was showing zero weight before entering this function, then
the user must manually enter the weight to be set as 100%. When “F4 PCT” is
displayed, enter the weight to be used for the 100% reference, then press
[Tare] to accept the reference weight. The display will show “0.00 %”.