Nova-Tech pH 110 - Manual (Page 25)

Instruction Manual CyberScan pH 11 / 110
21
7 MEMORY FUNCTION
The memory function is available in both pH 11 and pH
110 meters. These meters store data in sets:
x
pH and temperature
x
mV and temperature
x
Relative mV and temperature (for pH 110)
The pH 11 meter can store up to 50 sets of data while
pH 110 meter can store up to 100 sets of data. You can
store data in any combination of values. For example,
you can store 17 pH and 19 mV values.
7.1 Memory Input
1. During any measurement function (MEAS),
press MI/Ÿ key to input any data into the
memory.
2. MEM, “Sto” and memory number will flash. The
meter then returns to measurement mode.
3. If the memory is full, the display will flash “MEM
– FUL” momentarily (Figure 20). The first value
stored will be erased to create space for the new
value.
MEAS
READY
pH
ATC
°C
8.23
21.3
MEAS
READY
pH
ATC
°C
5.69
22.4
MEM
MEM
1
MEM
MEM
2
MI
MI
MEM
MEM
FUL
MEM
MEM
1
Figure 19: Data storage in
memory
Figure 20: Memory full
http://www.novatech-usa.com/Products/Laboratory-Equipment-Supply-Products Tel: (281) 359-8538 Toll Free:(866) 433-6682