Nova-Tech pH 110 - Manual (Page 28)

Instruction Manual CyberScan pH 11 / 110
24
Running CyberComm Portable on page 52.
6. To send data to the printer or computer, press the PRINT key.
8.2 Sending Data To Computer or Printer
When the PRINT key is pressed, there are two options:
x dAt / CUr: Print Data on Timed Interval basis. You can print any data
automatically based a pre-set timing from 5 to 30 seconds.
x dAt / StO: Print Stored Data from Memory. This simply dumps all data stored
in memory. You cannot print data from selected memory locations.
See Figure below.
ENTER
HOLD
ENTER
HOLD
MI MR
From pH or mV measurement mode.
Figure 23: Print data based on timed interval or from memory
http://www.novatech-usa.com/Products/Laboratory-Equipment-Supply-Products Tel: (281) 359-8538 Toll Free:(866) 433-6682