3 running cybercomm portable – Nova-Tech pH 110 User Manual
Page 56
Advertising
Instruction Manual
CyberScan pH 11 / 110
52
10.3 Running CyberComm Portable
Before running the DAS program, please ensure that the RS232 cable is connected
between the computer’s serial port and the meter’s port. See section 3.4 -
Connecting the RS232C Cable (Only for pH 110) on page 9.
Figure 54: Run the CyberComm Software program
Figure 55: The opening screen will appear as above
http://www.novatech-usa.com/Products/Laboratory-Equipment-Supply-Products Tel: (281) 359-8538 Toll Free:(866) 433-6682
Advertising
This manual is related to the following products: