Changing output voltage ranges – Teledyne 6200A - Sulfides analyzer User Manual

Page 183

Advertising
background image

TAI Model 6200A SO

2

Analyzer Operator Manual, 02164, Rev. G

9.3.3.2 Changing Output Voltage Ranges

Several different output voltage ranges can be selected by DIP switch setting on the V/F board.
See Figure 9-3 for the DIP switch settings. If you change the analog output voltage range,
then you must reset the power of the instrument and do a ADC/DAC calibration per
Section 9.3.3.1.

9-40

Advertising
See also other documents in the category Teledyne Equipment: