User, Interface, Start the pc m-link software on the pc – Gentec-EO M-LINK User Manual
Page 16: Make a connection with the m-link, The energy setup window, Nergy, Indow
Advertising
M-
LINK User’s Manual Revision 3.0
10
16- The PC M-LINK will automatically detect the M-LINK com port, if it fails, select the correct COM
Port (see section 3.2.3.2) and click Reconnect. You should see values pertaining to the current
settings on the PC M-LINK.
2.2 USER INTERFACE
2.2.1 Start the PC M-LINK software on the PC.
Click Start / Programs /GENTEC-EO/ PC M-LINK Software.
2.2.2 Make a connection with the M-LINK
The PC M-LINK will automatically detect the M-LINK com port, if it fails, select the correct COM
Port (see section 3.2.3.2)
2.2.3 The Energy Setup Window
Fig. 1-5 The Energy Set-up Window
Advertising