Gentec-EO M-LINK - Manual (Page 26)

M- LINK User’s Manual Revision 3.0 20
2.2.10 Averaging
The Averaging will use the number entered in the Setup Menu. The way to operate it is the same as the
histogram display.
This is a bar and line plot. The min is a white bar plot, the max is a blue bar plot, and the mean is a yellow
line plot. Each set of bars represent the min, max, and mean of the statistical batch.
The Bin Size (number of samples used to compute the min, mean, and max in each bar) is computed as:
Bin Size = Plot Size / Number of Bins. If the Plot Size is set to 100 and the Number of Bins is set to 10,
then there will be 10 samples in each bin.
Fig. 1-9 The Averaging Display