Recommended pc – Gentec-EO M-LINK User Manual
Page 29
Advertising
M-
LINK User’s Manual Revision 3.0
23
2.2.13 Recommended PC
Basic functions work well on PCs dated 2004 and later. If you want to measure higher than 800 kHz, you
have to use a computer with Dual Core or better and working on WinXP. If you want to be sure to
capture all points and you have a laser frequency above 800 Hz, do not run other programs at the same
time. The supported operating systems are Windows XP, Vista and 7.
In statistics mode, the frequency measurement resets itself after the pulse number reaches the number of
pulses set in the Status menu. If you want the reset to occur less frequently, set a very high number.
Advertising