Gentec-EO S-LINK - Manual (Page 35)

S- LINK User’s Manual Revision 2.4 30
Status definitions
*ST1: Status for Channel #1
*ST2: Status for Channel #2
Table 1
Hex Value
Address (first 5 bytes) 4 last bytes Definition in this example
:000000428 0000 0428 Wavelength in hex value 1064
:000010013 00001 0013 Current Scale in hex value 19= 3 mJ
:00002002B 00002 002B Trig Level in hex value/ 20.48 43/20.48= 2.1%
:000030000 00003 0000 Reserved
:000040000 00004 0000 Attenuator setting
0000 = no attenuator
0001= with attenuator
No Attenuator
:000050001 00005 00001 External trigger setting
0000 = off
0001 = on
On
:000060000 00006 0000 Anticipation
0000 = off
0001 = on
Off
:000070000 00007 0000 Energy mode for power head
0000 = off
0001 = on
Off
:100000000 End of file 0000