Gentec-EO S-LINK - Manual (Page 8)

S- LINK User’s Manual Revision 2.4 3
Energy meter specifications S-Link
Energy Range 0.08µJ to 20 kJ
Energy Scales 20 scales: 10uJ, 30uJ, 100µJ, 300µJ, 1mJ, 3mJ,
10mJ, 30mJ, 100mJ, 300mJ, 1J, 3J, 10J, 30J, 100J,
300J, 1kJ, 3kJ, 10kJ, 30kJ
Resolution (digital) Normal mode: Current scale/4096
Ascii mode: Current scale/32768
Accuracy
3
1.0 %

50 µV < 500 Hz
2.0 %

50 µV 500 Hz to 1.2 kHz
3%

50 µV 1.2 kHz to 6 kHz
6%

50 µV 6kHz to 10 kHz
Average Power accuracy Frequency Accuracy error + Joulemeter accuracy.
Frequency Accuracy 0.1 to 1000 Hz : 1%±0.1 Hz
5
1000 to 2000 Hz : 2%±0.1 Hz
5
5000 to 10000 Hz : 3%±1 Hz
5
Default Trigger Level 2 %
Software Trigger Level 0.1% to 99.9%, 0.1% resolution
Real Time Data Transfer 10 kHz/Channel in Normal mode no missing point with
USB 2.0 or Ethernet and recommended PC.
Statistics Current value, Max, Min, Average, Std Dev., RMS
stability, PTP stability, Pulse #, Repetition Rate, Avg
Power
Data Storage Limited to PC hard drive free space
General Specifications S-Link
Digital Display Computer screen
Display Rate 3 Hz in Real time mode.
15 Hz in Graphic mode.
Data Displays Real time, Ratio, Line plot, Histogram, Statistics and
3D Histogram.
User input correction factors 1 multiplier and 1 offset (7 digits floating point)
3
Including linearity.
5
With the recommended PC, no graphic display, usb latency set to 1ms and no other applications
running. The rep rate is much lower over the RS-232 link (5.7 Khz@115200, 480 Hz @9600, the rep rate
is divided by 2 if two channel is used).