Ethernet installation procedure, Nstall these files from the, Reate a – Gentec-EO S-LINK User Manual
Page 37: Cprdotnetdl4.1.0.2_web.exe – dotnetfx.exe
Advertising
S-
LINK User’s Manual Revision 2.4
32
3
Ethernet Installation Procedure
Connect the heads to the S-link, power the S-Link, and connect the S-Link to a Network. Do not
connect a USB connector, because the S-Link will switch to USB communication.
3.1 Install these files from the CD.
-
CprDotNetDL4.1.0.2_Web.exe
–
dotnetfx.exe
(if you already have dotnetfx installed with a superior version, skip this step)
3.2 Create a Com Port
Run CPR Manager
Go to the Device Menu and click Search.
Go to the Com Port Menu and select Add and Remove
Advertising