Oute the, Address to the new – Gentec-EO S-LINK User Manual
Page 39
Advertising
S-
LINK User’s Manual Revision 2.4
34
3.3 Route the IP address to the new Com Port.
Step1: Double Click on the new Com Port
Step2: Double Click the IP Address
. Select the “Add Rx Port” to set the firewall’s exclusion list if
needed.
Step3: Click on the blue disk icon to Save the settings. This will add a new Com Port to your computer.
You can now run the PC-interface (S-link) to connect to your S-Link.
Advertising