Gentec-EO S-LINK - Manual (Page 44)

S- LINK User’s Manual Revision 2.4 39
3.4.2 Setting the IP address in the S-Link
We recommend changing the S-link Setting (the IP address) only when you want to make a 2-
node network. Do not set the IP address up in the S-link on a Network unless you known that the
IP address is available. Ask your network manager to reserve you a fixed IP address if you do
not want to reassign the IP to the Com Port each time the S-link asks for an IP in the dynamic IP
settings.
Install the DI_4.2.0.0_Web file from the CD.
Load the Device Installer from Lantronix.
Select The Xport direct+ - firmware and click on the available IP.
Select the Web Configuration tab. Click go.