Gentec-EO S-LINK - Manual (Page 24)

S- LINK User’s Manual Revision 2.4 19
1.5.15 Recommended PC
Basic functions work well on PCs dated 2004 and later. If you want to measure higher than 1 kHz
and/or display the 3D histogram you have to have a computer and a graphics card like a Intel core 2 CPU
6420 2.13 Ghz, 4 of ram and a Nvidia Geforce 7300 LE or better.. If you want to be sure to get all points
and you have a laser frequency above 1 kHz, do not run other programs at the same time. If you want a
very accurate frequency measurement and average power in energy mode do not run the 3D graphic
display. The supported operating systems are Windows XP and Vista.
In statistics mode the frequency measurement resets itself after the pulse number reaches the
number of pulses set in the Status menu. If you want the reset to occur less frequently, set a very large
number. In order to have a precise frequency measurement above 1 kHz set the Latency Timer to 1 ms
in USB Advanced Settings. To access the Latency timer menu, in the Device Manager click Start
→
Settings → Control Panel → System → Device Manager.