Ransburg MMA-303 Direct_Ind Charge Atomizer A12870 - Manual (Page 59)

MMA-303 Direct/Indirect Charge - Operation
LN-9269-11.3 56
SHAPING AIR KIT #5
A12874-12/13 Dual Flex Shaping Air Kits
(for 55mm Cups)
Both shaping air outlets supply air that is coun-
ter to the rotation of the bell cup. Both sets of
shaping air holes are independently controlled.
The inner set of holes are supplied by connect-
ing the “blue” tube labeled “SAI” on the tubing
bundle to a regulated air source. The outer set
of shaping air holes are supplied by connecting
the “gray” tube labeled “SAO” on the tubing
bundle to a regulated source. The air supplies
work in combination with each other to provide
desired results. This combination of shaping
air can be used with any 65mm bell cup.