Ransburg MMA-303 Direct_Ind Charge Atomizer A12870 - Manual (Page 96)

MMA-303 Direct/Indirect Charge - Maintenance
93 LN-9269-11.3
Do not attempt to hold a rag or a gloved hand against the bell edge to stop or slow down a rotat-
ing bell.
Do not attempt to clean the bell edge while the bell is rotating.
Do not attempt to use sharp or abrasive materials to clean the bell, which will scratch or damage
the bell.
Do not attempt to place a high voltage probe on the bell edge unless rotation is full stopped.
Do not reuse an atomizer bell that shows signs of damage such as nicks, heavy scratches, dents,
or excessive wear (defined under "Bell Cup Cleaning" in the "Maintenance" section).
OPERATOR / MAINTENANCE
***WARNINGS***