IAI America IX-NNN12040 - Manual (Page 36)

2. Installation
30
2. Installation
2.1 Transportation
2.1.1 Handling of the Robot
Unless otherwise specified, the robot is delivered in the package as shown in the figure below.
There are stoppers attached on the J1 and J2 axes.
Notice: Remove the stoppers before starting to operate the robot.
Keep the removed stoppers, and use them to hold the robot when it is
necessary to transport or carry the robot.
Front Cover
Enclosed with Robot, Cables
Controller
J1-Axis Stopper J1-Axis Stopper
J2-Axis Stopper
Package Condition
J1-Axis Stoppers J2-Axis Stoppers