IAI America IX-NNN12040 User Manual
Page 83
Advertising
4. Maintenance inspection
77
6) A Warning window shows up. Click “Yes”. Process to acquire the push stopper position will
start.
7) Once the push stopper position acquisition is complete, the Information window will appear.
Click “OK” button.
8) When finishing the process, click “u” on the upper right side of the window. Once the
window is closed, the parameters start to be written automatically to the flash ROM, and
controller is rebooted by the software reset.
9) Once the controller reboot is finished, conduct the push type absolute reset on the axis
with the push stopper position acquisition.
Advertising
This manual is related to the following products: