IAI America IX-NNN12040 User Manual
Page 81
Advertising
![background image](/manuals/350279/81/background.png)
4. Maintenance inspection
75
(2) Vertical Axis, Rotation Axis
1) Select “Individual axis” in the Push stopper position acquisition window, and set Axis to
“Vert. Axis + Rot. Axis”.
2) In case there is a concern that a load may interfere with surroundings at the absolute reset,
detach the load. Have the work during the emergency stop condition. After the work is
finished, click on the “OK” button.
Advertising
This manual is related to the following products: